Degrader is a combined resampler and bitcrusher plugin. It can be used to simulate the sound of vintage digital gear, as a lofi-effect or distortion unit. Since all parameters are fully automatable it’s a handy plugin for creating unique and interesting drops, sweeps and other transitions.
Features
- Resamples between 250 Hz and 96 kHz
- Low pass filter with different characteristics both pre and post resampling.
- Bit depth can continuously be altered between 3 and 24 bits.
- Additional distortion algorithm.
- Parameter linking (control several parameters with one knob)
- Input and output gain control.
- Dry / Wet mix.
- Several factory presets simulating different vintage gear.
Anatomy
Filter bubble
Choose low pass filter character before and after resampling (off, low-q, high-q). Frequency is fixed to half the sample rate value.
Resampler
Control the amount of jitter, plus any sample rate between 250 Hz and 96kHz.
Crush them bits
Go as low as 3 bits of low resolution, and if that isn't enough - saturate until unrecognizable.
Master them bits
Use Input/Output to trim the gain levels, set the blend with the unprocessed signal, and A/B-test the effect with the Power button
Twitter
Facebook
